Back To Tools and Fastener Menu

DURO DYNE HAND TOOLS

Duro Dyne markets the finest quality hand tools for the sheet metal tradesman. In addition to such tools as snips, notchers and crimpers, Duro Dyne stocks a full compliment of other tools specifically designed for the HVAC industry. Duro Dyne is constantly testing and evaluating new tools for possible addition into our already extensive hand tool line.

RIVET GUN
The DDPR-5 Rivet Gun is designed for 1/8", 5/32", 3/16" diameter rivets. It releases the pin from installed rivets using the front of the tool. This tool is made of cast aluminum with plastic handle grips for comfort.  See Parts Listing for DDPR-5

DURO DIVIDERS
The DDIV-18 and DDIV-24 are heavy duty, plated steel dividers for scribing circles. They are available in two sizes for circles up to 36" or 48". Easy removable tips can be sharpened or replaced. Legs angled inward to allow the points to come very close together for small measurements and allows for a substantial working angle to a surface. The clamp holds the legs rigidly against each other without slippage when tightened.

TRAMMEL POINT TOOL
The hardened replaceable tips, designed for longer life, are held in with an allen screw. The high tension locking spring, with cushioned finger grips, holds the adjustable trammel rods firmly in position.

CIRCULAR STEEL GAUGE
The 323W Circular Steel Gauge is a heavy steel circular gauge for determining steel thickness from 0 through 36 gauge. It
is manufactured with zinc plated hardened steel and comes with its own protective storage case.

DURO STAPLER & STAPLES
The DS-31 stapler is the perfect tool to easily and quickly closed a fabric joint on a flexible duct connector.

STAINLESS STEEL CIRCUMFERENCE RULE
The DDCR-4 Circumference Rule is produced from 301 stainless steel, .060" thick with black etched numbering and markings spaced for 1/16" scale. The circumference equivalents are shown on the face and tables on the back.

STAINLESS STEEL EDGE SCRIBER
Stainless steel edge scribe for simple and easy marking of metal sheets. Attached magnet helps keep the tool within reach. Marks 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 1".

SCRATCH AWL AND TVC CHISEL

SHOP APRONS
A handy, beige canvas waist style apron with two deep pockets that will accommodate nails, screws or a few small hand tools. Features Duro Dyne logo on one pocket and graphics of Super Saber and Pro Point screws on the other pocket.

STEEL TINNER'S HAMMER
The DDTH-18 Steel Tinner's Hammer is only available in one convenient size; 18 ounce. This hammer is made of one piece polished solid steel with an industrial strength rubber grip fastened securely in place.

HOLE CUTTER AND REPLACEMENT BIT
The DDHC-12 Hole Cutter can cuts holes up to a maximum diameter of 12" through light gauge aluminum metal, plastics and formica. It has an easy read scale from 2" to 12". See also the DDHC-12 Specification Sheet (PDF format)
The DDHC-12RB Replacement Bit is a three fluted cutting bit. This mill style bit is designed to cut from the side. The bit comes with the drill attachment rod and a safety cap.

HEX KEY SETS
The FKS-9 9 pc. Fold Up Key Set contains two types of wrenches: the six smaller sizes, (5/64", 3/32", 7/64", 1/8", 9/64" and
5/32") have chamfered ends, while the larger sizes, (3/16", 7/32" and 1/4") are ball points. The ball points allow angled entry up to 25°.
All hex keys are manufactured from industrial quality hardened steel. This sturdy unit is designed with a strong, but lightweight, high visibility, ergonomically designed hardened plastic case for comfort and longevity.
The BLX-12 12 pc L-Wrench Key Set is packaged in a patented Bondhex™ key case that will lock your wrenches in place. Simply slip wrenches into their individually marked slots and twist to lock securely in place. The sizes range from .050 to 5/16". The short side of the L-wrench is designed with a chamfered end while the long side has a ball point for those hard to reach places. The ball points allow entry up to 25°. All wrenches are manufactured from industrial hardened steel.

MAGNETIC TORPEDO LEVEL
The Magnetic Torpedo Level is designed for use by professionals or home craftsmen. This level has a full length, "V" groove magnet which secures and self aligns the level on pipe or conduit. It has three plastic vials for horizontal, vertical and 45°.
The horizontal vial has an additional top viewing slot. End caps protect against accidental bumps and drops.

METAL EDGE TURNING TOOL
The WMET Metal Edge Turning Tool is an extruded high strength aluminum tool for turning flanges on 24 through 30 gauge mild steel. The new WMET tool will turn 1" and 3/8". The WMET's are lightweight and will not rust.

MIGHTY MAG
The Mighty Mag is the Perfect Picker Upper! It is a lightweight magnetic materials handler with five pounds of holding power. It is equipped with a magnetic handle release. Designed for easy one-hand operation.