Dyna-Tite Cable Locks and KV12 Bracket Assembly

Go To Duro Dyne Home Page

Back To Dyna-Tite Menu

Dyna-Tite Logo

CL23 CABLE LOCK The Maximum Load Range for each size wire rope incorporates a design safety factor of 5:1. The CL23 and wire rope combination should be sized for the job so that the projected load falls within the appropriate working load limit (WLL). Wire Rope for use with the CL23 is supplied in rolls. The 1/8 inch comes in 500 foot rolls. The 3/16 inch wire rope is supplied in 250 foot rolls. See CL23 Cable Lock and Wire Rope Specifications
Item No.	Code	Description	Use Wire Rope Diameter for CL-23 Cable Lock		Safe Working Load at 5:1 Safety Factor	Box Quantity
30350	CL23	Cable Lock				100 per box
30204	WC-4	Wire Rope	1/8"		25-250 lbs	500 foot roll
30206	WC-6	Wire Rope	3/16"		50-640 lbs	250 foot roll
CL18 CABLE LOCK The Dyna-Tite CL18 Cable Lock is for use with 3/32 inch and 1/8 inch wire rope. These size wire ropes are available in 500 foot rolls. Depending upon the wire rope utilized, the CL18 has a working load limit of up to 225 lbs. As with all Dyna-Tite cable locks, the CL18 features and easy release pin for simple adjustments without the use of tools. See CL18 Cable Lock and Wire Rope Specifications
Item No.	Code	Description	Use Wire Rope Diameter for CL-18 Cable Lock		Safe Working Load at 5:1 Safety Factor	Box Quantity
30354	CL18	Cable Lock				100 per box
30202	WC-3	Wire Rope	3/32"		25-150 lbs	500 foot roll
30204	WC-4	Wire Rope	1/8"		25-225 lbs	500 foot roll
CL12 CABLE LOCK The CL12 is designed for use with either 1/16 inch or 3/32 inch wire rope. The wire rope is available in 500 foot rolls. As with all Dyna-Tite cable locks, the CL12 includes release pins for easy adjustment. The CL12 is the perfect product for hanging smaller diameter spiral (less than 24 inches), typical residential and light commercial ductwork, and air handlers in attics. See CL12 Cable Lock and Wire Rope Specifications

Item No.	Code		Description	Use Wire Rope Diameter for CL-12 Cable Lock	Safe Working Load at 5:1 Safety Factor		Box Quantity
30351	CL12		Cable Lock				100 per box
30200	WC-2		Wire Rope	1/16"	0-75 lbs		500 foot roll
30202	WC-3		Wire Rope	3/32"	25-150 lbs		500 foot roll
30230	LC15-332		Loop Cable Sling	3/32" x 15 feet			100 per box
30232	LC25-332		Loop Cable Sling	3/32" x 25 feet			50 per box
KV12 BRACKET ASSEMBLY The KV12 Bracket assembly enhances the Dyna-Tite suspension system by the addition of an integral bracket, which fastens the cable lock to the duct with sheet metal screws. Once the KV assembly bracket is attached to the duct, the wire rope "drop" is passed into the entry hole at the top of the bracket, through the cable lock, and out the exit hole at the bottom. The locking teeth inside the cable lock engage the wire rope and secure the ductwork in place. The KV12 Bracket assembly and the CL12 have a working load limit of up to 150 lbs, depending upon the wire rope utilized.
Item No.		Code		Description		Box Quantity
30361		KV12		Bracket Assembly with CL-12 For use with WC2 1/16" or WC3 3/32" Wire Rope		100 per box