 |
THERMAFAB™ is a
specially developed fiberglass fabric, coated on both sides with
silicone rubber. It incorporates a very broad temperature range with
outstanding resistance to weathering, aging, the effects of sunlight,
and a wide variety of chemicals. Please refer to the THERMAFAB™ does not support combustion and produces very little smoke on exposure to flame and extreme heat. It is supplied in 30m (100 ft) coils of fabric joined on both sides to galvanized steel, or as a fabric only for special applications. Please refer to Flexible Connector Ordering Information. |
|
RECOMMENDED USES
While it may be used almost anywhere a flexible duct connector is needed, THERMAFAB is particularly suited to those applications exposed to higher temperatures, or where the risk of fire is concerned. THERMAFAB's extremely low smoke emission alleviates the possibility of noxious fumes from the connector being added to the duct air stream in the event of a fire.
|
SPECIFICATIONS |
|||
| Base Fabric: | Woven Fiberglass | Temperature Range: | -60° to 260°C (-75° to 500°F) |
| Coating: | Silicone rubber | Fire Resistance: |
Flameproof. Will not support combustion. Surpasses Standards for Safety as per "Flame Tests of Flame Resistant Fabrics", NFPA 701. Meets requirements for Duct Connectors as per National Fire Protection Association, Standards 90A and 90B. |
| Mass (Weight): | 576 g/m˛ (17 oz/yd˛) | ||
| Thickness: | 0.50mm (.019") | ||
| Tensile Strength: | 889x1120N (200x250 lbs) | ||
| Tear Strength: |
50x40 lbs | Approvals: | UL classified, File No. R4462. Approved for use by California State Fire Marshal, City of Los Angeles, City of Denver. |
| Burst Strength: | 160 psi | ||
